DOOR GASKET OVEN OLIS 530x450 mm

DOOR GASKET OVEN OLIS

General Info:
in the silicone elastomer
profile size 25,5x19 mm
COLOR BLACK

For: OLIS convection Oven electric CV6E, CV6E-2, CV6E-S, CV6E-S2, CVM6E, CVM6E-2, CVM6E-S, CVM6E-S2, CVP6E, CVP6E-2, CVP6E-S, CVP6E-S2
OLIS convection Oven gas CV6G, CV6G-2, CV6G-S, CV6G-S2, CVM6G, CVM6G-2, CVM6G-S, CVM6G-S2, CVP6G, CVP6G-2, CVP6G-S, CVP6G-S2, ECVMG6, ECVPG6

Adaptability:
MANUFACTURER CODE
BN3108600 BARON
BN3108600 METOS
3108600 METOS
BN3108600 OLIS

Sales and spare Parts gaskets for oven door convection electric convection gas OLIS

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.