DOOR GASKET OVEN RATIONAL 1475x670 mm

DOOR GASKET OVEN RATIONAL

General Info:
in the silicone elastomer
profile dimensions 27x17 mm
BLUE COLOR

To: RATIONAL Oven convection electric CM 202, AND CM 202 AND - WE PLUS, 202 CM AND 200V 50-60Hz, CM 202 AND 208V 60Hz, SCC 202 AND SCC 202 AND WE, SCC 202 AND 200V 50-60Hz, SCC 202 AND 208V 60Hz, SCC 202 E 400V 50-60Hz
RATIONAL convection Oven gas 202 CM G, CM 202 G - WE PLUS, CM 202g 120V 60Hz, SCC 202 G - WE, SCC 202 G 100V 50-60Hz, SCC 202 G 120V 60Hz, SCC 202 G 230V 50-60Hz

Adaptability:
MANUFACTURER CODE
RT2000399P FAGOR
2000399 FRIMA
2000399P FRIMA
2000399 METOS
2000399P METOS
2000399 RATIONAL
2000399P RATIONAL

In this category you can find all the models of gaskets for oven door the RATIONAL for professional kitchens

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.