DOOR GASKET OVEN COVEN
DOOR GASKET OVEN COVEN
DOOR GASKET OVEN COVEN
DOOR GASKET OVEN COVEN
DOOR GASKET OVEN COVEN
DOOR GASKET OVEN COVEN

DOOR GASKET OVEN COVEN

€66.20
Tax included

DOOR GASKET OVEN COVEN

custom html
You can pay safely with:

 

DOOR GASKET OVEN COVEN

General Info:
in the silicone elastomer
profile dimensions 17x14 mm
RED COLOR
SALES PER LINEAR METER

For: COVEN convection Oven electric N5PMEC, TEC3, TEC3MD, TEC3MX, TEC4P

Adaptability:
MANUFACTURER CODE
MCGP3/4 COVEN
MCGP3/4P COVEN

Sales and spare Parts gaskets for oven door convection electric convection gas COVEN

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.

93 Items
New product
Product added to compare.