DOOR GASKET OVEN COVEN 2514 - 6 m

DOOR GASKET OVEN COVEN

General Info:
in the silicone elastomer
profile dimensions 21,5x12,5 mm
COLOR BLACK

For: COVEN convection Oven electric TEC10, TEC10MX, TEC2, TEC3, TEC4MX, TEC4P
COVEN convection Oven gas TEC6G, TEC6GMX, TEC7G, TEC7GP

Adaptability:
MANUFACTURER CODE
MCGP0002 COVEN

Sales and spare Parts gaskets for oven door COVEN

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.