DOOR GASKET OVEN GIERRE 865x645 mm

DOOR GASKET OVEN GIERRE

General Info:
in the silicone elastomer
profile dimensions 22x13,5 mm
COLOR BLACK

For: GIERRE Oven convection electric FEV-120E, FEV-120M, FEV-122E, FEV-122M, FEV-122P, FEV-124E, FEV-124M, FEV-124P
GIERRE Oven convection gas FEV-121, FEV-121M, FEV-123E, FEV-123M, FEV-123P, FEV-125E, FEV-125M, FEV-125P

Adaptability:
MANUFACTURER CODE
GUA510 GIERRE
XXGUA510 GIERRE

In this category you can find all the models of the door seals the oven for cooking facilities professional brand GIERRE

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.