Can't find a spare part? Contact us
Tel: +39 0705435282
WhatsApp +39 3339964972
Email: [email protected]
Spare Parts Dishwashers Cup Washer
CONTAINER, CUTLERY holder FOR DISHWASHER COMENDA 130x55x100 mm
€3.89
CONTAINER, CUTLERY holder FOR DISHWASHER DESCO 113x113x130 mm
CONTAINER, CUTLERY holder FOR DISHWASHER DESCO 113x113x130 mm
€8.61
Curved Loading Hose ø 3/4 "FF 1500 mm with WRAS approval
It is a water inlet hose with nylon fittings for professional dishwashers compatible with the brands ADLER, COOKMAX, WHIRLPOOL - INDESIT. It has dimensions ø 13x19 mm. Adaptability: MANUFACTURER CODE AMATIS COOKMAX HORECA SELECT HOSHIZAKI OZTIRYAKILER PARRY RANCILIO SILANOS WHIRLPOOL - INDESIT
€13.34
2002202H BONNET Electronic Board Support Feet
It is a support for the electronic board for professional dishwashers code CWP2 AMIKA. It is compatible with the brands MBM, ELETTORBAR, DEXION. Adaptability: MANUFACTURER CODE AMATIS CWP2 AMIKA ANGELO PO APACH 2002202H BONNET CWP2 COLGED CWP2 DEXION CWP2 ELECTROBAR CWP2 EUROWASH CWP2 MBM SAGI 2002202H THIRODE CWP2 WOLK
€3.22
Kit Manifold Lower SAMMIC SAM363 ASCASO
SAM363 ASCASO kit for manifold for dishwasher professional code SAM363 ASCASO. It is compatible with equipment SAMMIC, ASCASO. Version with mounting position bottom and height 65 mm.
Adaptability:MANUFACTURER CODESAMMICSAM363 ASCASO
€17.72
Programmer 11803F1 3 Cams
11803F1 is a timer for dishwasher/glasswashers professional code 11803F1ADE000.020 CDC / 2319219 SAMMIC / 2310451 SAMMIC. It is compatible with equipment Elettromeccanica CDC, Sammic. Programmer cyclic 120 seconds, compact in size 3 cams.
Adaptability:MANUFACTURER CODE11803F1ADE000.020 ELETTROMECCANICA CDC2319219 SAMMIC2310451 SAMMIC
€96.64
Curved Loading Hose ø 3/4 "FF 1500 mm
It is a water inlet hose with nylon fittings for professional dishwashers code 909001 EPMS. It is compatible with the brands ELFRAMO, KOMEL, WHIRLPOOL - INDESIT. It has dimensions ø 10x14.5 mm. Adaptability: MANUFACTURER CODE ATEL BAUKNECHT BAUMATIC BERLONI CANDY DESCO ELECTROLUX ELFRAMO
€10.99
Pump Discharge 2310784 SAMMIC
2310784 SAMMIC is a pump drain for dishwasher professional code 2310784/2319439 SAMMIC. It is compatible with equipment SAMMIC. Power capacity 150W, voltage of 230V and a frequency of 50Hz.
Adaptability:MANUFACTURER CODE2310784 SAMMIC2319439 SAMMIC
€257.37
Tang, pop-up waste for Glass/Lavatazze SAMMIC 3316156
Tang, pop-up waste for Glass/Lavatazze SAMMIC 3316156
€31.96
80934 COLGED Flat Cable 10 Poles 730 mm
It is an electronic board connection cable for professional dishwasher code DWS90 ELETTROBAR. It is compatible with the brands MBM, WOLK, AMIKA, DEXION. It has dimensions 730 mm Adaptability: MANUFACTURER CODE 80934 AMATIS AMIKA ANGELO PO APACH BONNET CHAPTER 80934 COLGED 926281 DEXION DWS90 ELECTROBAR EUROWASH MAIDAID 926281 MBM SAGI 2001087H THIRODE...
€36.90
33D0390 ANGELO PO Plastic Overflow Pipe ø 27x120 mm
It is a plastic tube for professional dishwashers code 3011009 SLAYER BLADES. It is compatible with the brands SAGI, SILKO. It has dimensions ø 27x120 mm Adaptability: MANUFACTURER CODE 33D0390 ANGELO PO ASCASO ATA WISE SILKO
€11.88
Programmer 7803F1 32Z5720 3 Cams
7803F1 is a programmer for professional dishwashers code 32Z5720 ANGELO PO / 4717 ATA. It is compatible with equipment ANGELO PO, ATA, BONNET, CDC, HOONVED, SAGI, SMMIC. Timer cycle is 120s.,compact in size from 3 cams.
Adaptability:MANUFACTURER CODE32Z5720 ANGELO PO4717 / 7287 ATA905032 BONNET4717 / 7803F10ADE0000010 ELETTROMECCANICA CDCHOONVED32Z5720...
€112.52
Dosing Pump Germac G252 Detergent For Dishwasher - 3090173
DOSING PUMP GERMAC G252 DETERGENT FOR DISHWASHER - 3090173
€103.71
2319053 SAMMIC Control Board 140x100 mm
It is an electronic board for professional dishwashers compatible with SAMMIC brands. It has dimensions 140x100 mm Adaptability: MANUFACTURER CODE 2319053 SAMMIC
€229.12
Curved Loading Hose ø 3/4 "FF 2000 mm with VDE approval
It is a water inlet hose with metal fittings for professional dishwashers compatible with the AMATIS brands. It has dimensions ø 13x19 mm. Adaptability: MANUFACTURER CODE AMATIS
€13.50
RAISING the STANDARD FOR DISHWASHER FORCAR 500x500x45 mm
RAISING the STANDARD FOR DISHWASHER FORCAR 500x500x45 mm
€17.78
Exhaust pipe ø 29x1500 mm
It is a drain hose for professional dishwashers code 2009001 SLAYER BLADES. It is compatible with the brands ANGELO PO, COLGED, DIHR, ELETTROBAR. It has internal dimensions ø 24 and 28 mm Adaptability: MANUFACTURER CODE AMIKA ANGELO PO APACH ASCASO ATEL
€12.88
6004 ZZ NSK Ball Bearing
6004 ZZ NSK is a ball bearing for professional slicer / mincer compatible with the brands FAMA, FIMAR, OEM. It has an external ø 42mm, internal ø 20mm and a thickness of 12mm. Adaptability: MANUFACTURER CODE COOKMAX FAME FIMAR OEM OZTIRYAKILER SAMMIC SIRMAN
€7.98
Nozzle Rinse Stainless ELFRAMO M5x1
And a nozzle rinse for dishwasher professional, compatible with equipment ELFRAMO, EMMEPI, KOMEL. It has a height of 10 mm and a diameter of 8 mm.
Adaptability:MANUFACTURER CODEELFRAMOEMMEPIKOMELMBMSAMMIC
€25.20
9737 ATA Plastic Overflow Pipe ø 40x315 mm
It is a plastic tube for professional dishwashers code 3011022 SLAYER BLADES. It is compatible with the brands ASCASO, ATA. It has dimensions ø 40x315 mm Adaptability: MANUFACTURER CODE ASCASO 3011022 SLAYER BLADES
€37.60
THERMOSTAT SINGLE PHASE THERMOSTAT TR2 0-90°C ARISTARCO, ATA, BONNET, COLGED, COMENDA, ELETTROBAR, LINEA BLANCA
THERMOSTAT SINGLE-PHASE 15A 250V
€46.78
BASKET for GLASSES FOR GLASS ARISTARCHUS 350x350x150 mm
BASKET for GLASSES FOR GLASS ARISTARCHUS 350x350x150 mm
€25.48