GASKET OVEN DOOR MODULAR 2820 mm
GASKET OVEN DOOR MODULAR 2820 mm
GASKET OVEN DOOR MODULAR 2820 mm
GASKET OVEN DOOR MODULAR 2820 mm
GASKET OVEN DOOR MODULAR 2820 mm
GASKET OVEN DOOR MODULAR 2820 mm

GASKET OVEN DOOR MODULAR 2820 mm

€194.25
Tax included

GASKET OVEN DOOR MODULAR 2820 mm

custom html
You can pay safely with:

 

GASKET OVEN DOOR MODULAR

General Info:
in the silicone elastomer
profile dimensions 28x20 mm
COLOR BLACK

For: INOXTREND convection Oven electric-FBA-110E, FBE-110E, FBP-110E, FDA-110E, FDE-110E, FDP-110E, FUA-106E, FUA-110E, FUE-110E, MB1A-10E, MB1E-10E, MBA-10E, MBE-10E, MBP-10E, MDA-10E, MDE-10E, PD-10E, MHA-10E, MRE-10E-U, MUA-10E, MUE-10E
INOXTREND convection Oven gas FBA-110G, FBE-110G, FBP-110G, FDA-110G, FDE-110G, FDP-110G, FUA-110G, FUE-110G, MB1A-10G, MB1E-10G, MBE-10G, MBP-10G, MDA-10G, MDE-10G, PD-10G, MUA-10G, MUE-10G
MODULAR convection Oven gas NWV-10G
MODULAR electric Oven NWM-10E-AV
WHIRLPOOL convection Oven electric HW10E
WHIRLPOOL convection Oven gas AGS895, AGS898, HW10G

Adaptability:
MANUFACTURER CODE
C5221-00 INOXTREND
RRC5221-00 INOXTREND
RRC5221-00 MODULAR
F50113 WHIRLPOOL
483286008684 WHIRLPOOL
771985010282 WHIRLPOOL

In this category you can find all the models of gaskets for oven door MODULAR for professional kitchens

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.

100 Items
New product
Product added to compare.