KIT, DOOR GASKET OVEN HOBART
General Info:
full silicone for the fixing
profile dimensions 18x12 mm
COLOR BLACK
For: BOURGEOIS convection Oven electric CP1012, CP1022
Adaptability:
MANUFACTURER CODE
KITJOIN018 BOURGEOIS
JOIN018 BOURGEOIS
In this category you can find all the models of the door seals the oven HOBART to cooking facilities professional
Instructions and tips for the replacement/installation of the seals:
1) Remove the old seal from its seat
2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents
3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap
4) Mount the gasket starting from the corners in the sequence: (as in photo 1)
- First mount the 4 corners A-A1, B-B1
- Then the center between the points C-C1
- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1
*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)
*IMPORTANT: CHECK DOOR SEAL
- If the gasket is mounted correctly, steam should not result in a loss of steam
- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.
Care and repeated cleaning during the day, greatly extend the life of the seals.