DOOR GASKET OVEN MBM 680x460 mm

DOOR GASKET OVEN MBM

General Info:
in the silicone elastomer
profile dimensions 22x20 mm
COLOR BLACK

To: MBM convection Oven electric FEP050
MBM convection Oven gas FGP050

Adaptability:
MANUFACTURER CODE
RTFOC00093 COLGED
PAFOC00574 COLGED
PAFOC00577 COLGED
RTFOC00093 ELETTROBAR
PAFOC00574 ELETTROBAR
PAFOC00577 ELETTROBAR
RTFOC00093 MBM
PAFOC00574 MBM
PAFOC00577 MBM

In this category you can find all the models of gaskets for oven door MBM for professional kitchens

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.