DOOR GASKET OVEN HOBART

DOOR GASKET OVEN HOBART

General Info:
in the silicone elastomer
profile dimensions 11x7 mm
COLOR GREY
SALES PER LINEAR METER

To: BONNET, convection Oven
HOBART convection Oven electric CS0612E, CS1012E, CS1022E, CSD 0612 E, CSD 1012 E, CSD 1022 E, CSD, AND CSE, CSL06E, CSL10E, CSM0611IE, CSM1011IE, CSM1021IE, CSM2011IE, CSM2021IE, WCL0612E, WCL1012E
HOBART convection Oven gas CS1013G, CS2013G, CSD1013G, CSD2013G
HOBART Oven steam elettricoWCSL0612E, WCSL1012E, WCSL1022E, WCSL2012E

Adaptability:
MANUFACTURER CODE
71876E BONNET
JOIN219 BOURGEOIS
JOIN016 BOURGEOIS
PROF1612 BOURGEOIS
492455 HOBART
71876E THIRODE

Sales and spare Parts gaskets for oven door, HOBART

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.