DOOR GASKET OVEN GIORIK
General Info:
in the silicone elastomer
profile dimensions 30x22 mm
for 6 grids 3 mt
for the 10 grids, 3 mt
for 20 grid 5 mt
COLOR BLACK
SALES PER LINEAR METER
For: GIORIK Oven convection electric CE06MX, CE102MX, CE10MX, CE20MX, DE06EC,
DE06ES, DE06MX, DE102EC, DE102ES, DE102MX, DE10EC, DE10ES, DE10MX, EDE0102, VE06EC, VE06MX, VE102EC, VE102M, VE102MX, VE10EC, VE10M, VE10MX, VE20EC, VE20MX
GIORIK Oven convection gas CG06ES, CG06MX, CG102MX, CG10MX, CG20MX, DG06EC, DG06ES, DG06MX, DG102EC, DG102MX, DG10EC, DG10ES, DG10MX, VG06EC, VG06MX, VG102EC, VG102MX, VG10EC, VG10MX, VG20EC, VG20MX
Adaptability:
MANUFACTURER CODE
7070166 GIORIK
RCK7070166 TECNOINOX
Sales and spare Parts gaskets for oven door GIORIK for industrial kitchens professional
Instructions and tips for the replacement/installation of the seals:
1) Remove the old seal from its seat
2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents
3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap
4) Mount the gasket starting from the corners in the sequence: (as in photo 1)
- First mount the 4 corners A-A1, B-B1
- Then the center between the points C-C1
- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1
*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)
*IMPORTANT: CHECK DOOR SEAL
- If the gasket is mounted correctly, steam should not result in a loss of steam
- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.
Care and repeated cleaning during the day, greatly extend the life of the seals.