SEAL GLASS OVEN MBM

SEAL GLASS OVEN MBM

General Info:
Item sold in multiples of 4
in the silicone elastomer
profile dimensions 10x9 mm
COLOR BLACK
SALES PER LINEAR METER

For: DEXION convection Oven gas FC006-03-002GM, FV110-03-102GA, FV110-23-112GA
MBM convection Oven DRIVE 110, the DRIVE 210, the DRIVE 610
MBM convection Oven electric FCE10, FCE20, FCE6, FEM107SC, FEM109, FEM207SC, FEM67SC, FEM69, FEMD107SC, FEMD109, FEMD207SC, FEMD209, FEMD67SC, FEMD69, FEP050, FEP080, FEP160
MBM convection Oven gas FCG10, FGM107SC, FGM109, FGM207, FGM67SC, FGM69, FGMD107SC, FGMD109, FGMD207, FGMD209, FGMD67SC, FGP050, FGP080, FGP160

Adaptability:
MANUFACTURER CODE
MPGOM03P00 COLGED
MPGOM03P00 DEXION
MPGOM03P00 ELETTROBAR
MPGOM03P00 HOBART
MPGOM03P00 MBM

Sales and spare Parts gaskets for oven door convection electric convection gas MBM

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.