DOOR GASKET OVEN OLIS 690x480 mm

DOOR GASKET OVEN OLIS

General Info:
in the silicone elastomer
profile size 25,5x19 mm
COLOR BLACK

For: DEXION convection Oven electric FV006-14-001ED, FV006-34-001EDL, FV106-03-001EA, FV106-23-010, FV106-23-011EA
DEXION convection Oven gas FV106-03-000GA, FV106-23-010GA
MBM convection Oven DRIVE 610
MBM convection Oven electric FEM610, FEM67, FEM67SC, FEM69, FEM69SC, FEP050
MBM convection Oven gas FGM610, FGM67, FGM67SC, FGM69, FGP050

Adaptability:
MANUFACTURER CODE
RTFOC00721 COLGED
RTFOC00721 DEXION
RTFOC00721 ELETTROBAR
91100.220.007 FLAME RTD
RTFOC00721 MBM

In this category you can find all the models of the door seals the oven for cooking facilities professional brand OLIS

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.