DOOR GASKET OVEN OLIS
General Info:
in the silicone elastomer
profile size 25,5x19 mm
COLOR BLACK
For: DEXION convection Oven gas FC006-03-002GM, FV106-03-100GA, FV106-23-110GA
HOBART convection Oven electric HFCE6
MBM convection Oven electric FCE6, FEMD67, FEMD67SC, FEMD69
MBM convection Oven gas FCG6, FGMD67, FGMD67SC, FGMD69
Adaptability:
MANUFACTURER CODE
RTFOC00723 COLGED
RTFOC00414 COLGED
RTFOC00723 DEXION
RTFOC00414 ELETTROBAR
RTFOC00723 ELETTROBAR
RTFOC00723 HOBART
RTFOC00414 MBM
RTFOC00723 MBM
In this category you can find all the models of the door seals the oven for cooking facilities professional brand OLIS
Instructions and tips for the replacement/installation of the seals:
1) Remove the old seal from its seat
2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents
3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap
4) Mount the gasket starting from the corners in the sequence: (as in photo 1)
- First mount the 4 corners A-A1, B-B1
- Then the center between the points C-C1
- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1
*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)
*IMPORTANT: CHECK DOOR SEAL
- If the gasket is mounted correctly, steam should not result in a loss of steam
- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.
Care and repeated cleaning during the day, greatly extend the life of the seals.