DOOR GASKET OVEN ZANUSSI 585x395 mm

DOOR GASKET OVEN ZANUSSI

General Info:
seal interlocking
in the silicone elastomer
profile dimensions 17x17 mm
COLOR BLACK

For: ZANUSSI convection Oven electric FCFE6D (241051), FCFE6D (241052), FCFE6 (241550), FCFE6UK (241555), PFCFE6 (241565), FCFE6J50 (243200), FCFE6J60 (243202), FCVE6-1U (244240), FCVE6-3U (244245), FCVE6-1 (244301),
FCVE6-3 (244303), FCVE6-3CE (244318), FCVE6-1UK (244341), FCVE6-3UK (244343), FCF/E6 (2FC52B), FCV/E6-1 (2FM02B), FCV/E6-1 (2FM04B), AFCF/E6 (697680), COCO6E (724224), FCFE061 (770234)
ZANUSSI convection Oven gas FCFG6D (241006), FCFG6 (241500), FCFG6F (241510), PFCFG6 (241515), FCFG6J (243226), FCFG6J (243227), FCFG6J (243228), FCFG6J (243229), FCVG6-1 (244401), FCVG6-3 (244403), FCVG6-1UK (244441), FCVG6-3UK (244443), FCF/G6 (2FC02B), FCV/G6-1 (2FM06B), ZOFCV/G6-3 (2FM08B), AFCV/G6-1 (697600), AFCV/G6-3 (697610), SCO/G6-3 (697615), FF/G6 (697690), COCO6G (724222), COCVE423AF (724302), ZOFCF/G6D (770345)

Adaptability:
MANUFACTURER CODE
055414 ALPENINOX
055414 ELECTROLUX PROFESSIONAL
155414 WHIRLPOOL
771985003151 WHIRLPOOL
055414 ZANUSSI

Sales and spare Parts gaskets for oven door convection electric convection gas ZANUSSI

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.