DOOR GASKET OVEN ZANUSSI 720x640 mm

DOOR GASKET OVEN ZANUSSI

General Info:
seal interlocking
in the silicone elastomer
profile dimensions 17x17 mm
COLOR BLACK

For: ZANUSSI convection Oven electric FCFE10 (241150), FCFE10UK (241155), FCFE20 (241250), FCFE20UK (241255), FCVE10 (242150), FCFE10J (243206), FCFE10J (243208), FCFE20J (243214), FCFE20J (243216), FCVE10-2 (245302), FCVE10-4 (245304), FCVE103CE (245318), FCVE10-2UK (245342), FCVE10-4UK (245344), FCVE20-2 (246302), FCVE20-4 (246304), FCVE203CE (246318), FCVE20-2UK (246342), FCVE20-4UK (246344), FCVE10-P (254319), FCVE10PUK (255319), FCVE20-P (258319), FCVE20PUK (259319), FCF/E10 (2FC53B), FCF/E20 (2FC54B), ZOFCV/E102 (2FM12B), ZOFCV/E104 (2FM14B), ZOFCV/E202 (2FM22B), ZOFCV/E204 (2FM24B), FF/E10 (697700), FF/E20 (697720), COCO10E (724208), COCO20E (724214), FCFE101 (770258), FCFE201 (770259)
ZANUSSI convection Oven gas FCFG10 (241100), FCFG10D (241105), FCFG10NL (241120), FCFG20 (241200), FCFG20D (241205), FCFG20F (241210), PFCFG20 (241215), FCFG10J (243204), FCFG10J (243205), FCFG20J (243210), FCFG20J (243212), FCFG10J (243230), FCFG10J (243232), FCFG20J (243234), FCFG20J (243236), FCVG10-2 (245402), FCVG10-4 (245404), FCVG10-ISG (245405), FCVG10-2 (245412), FCVG10-4D (245414), FCVG10-2UK (245442), FCVG10-4UK (245444), FCVG10-2 (245482), FCVG10-4 (245484), FCVG20-2 (246402), FCVG20-4 (246404), FCVG20-2 (246412), FCVG20-4D (246414), FCVG20-2UK (246442), FCVG20-4UK (246444), FCVG20-4 (246482), FCVG20-4D (246484), FCVG10-P (256319), FCVG10PUK (257319), FCVG20-P (260319), FCVG20PUK (261319), FCFG101 (2FC03B), FCFG201 (2FC04B), ZOFCV/G102 (2FM16B), ZOFCV/G104 (2FM18B), ZOFCV/G202 (2FM26B), ZOFCV/G204 (2FM28B), AFCV/G101 (697621), AFCV/G103 (697631), SCO/G10-3 (697635), AFCV/G201 (697641), AFCV/G203 (697651), SCO/G20-3 (697655), FF/G10 (697710), FF/G20 (697730), COCO10G (724206), COCO20G (724212), FCVG10-ISG (724350), ZOFCF/G10D (770334), ZOFCF/G20D (770347)

Adaptability:
MANUFACTURER CODE
055315 ALPENINOX
055315 ELECTROLUX PROFESSIONAL
055315 KLEMOR
771985003102 WHIRLPOOL
155315 WHIRLPOOL
055315 ZANUSSI

We have available all models of gaskets for oven door ZANUSSI for industrial kitchens professional

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.