DOOR GASKET OVEN UNOX

DOOR GASKET OVEN UNOX

General Info:
in the silicone elastomer
profile dimensions 22x14 mm
COLOR BLACK
SALES PER LINEAR METER

For: UNOX convection Oven XVC514G
UNOX convection Oven electric XB403, XB603, XB603G, XB803, XB803G, XBC405, XBC605E, XBC804, XBC805, XBT160, XV1003G, XV203G, XV303G, XVC2004P, XVC304, XVC305, XVC305P, XVC504, XVC505, XVC704, XVC704P, XVC705, XVT203G
UNOX convection Oven gas XB403G, XBC615G, XBC815G, XBT146, XG413G, XG613G, XG813G, XVC2015G, XVC314G, XVC4015G, XVC714G
UNOX Oven bakery gas XV703G

Adaptability:
MANUFACTURER CODE
GN100 UNOX
GN1000 UNOX
GN1000A0 UNOX
GN1000B0 UNOX
040GUA00001 VENIX
040GUA00002 VENIX

We have available all models of gaskets for oven door UNOX for industrial kitchens professional

Instructions and tips for the replacement/installation of the seals:

1) Remove the old seal from its seat

2) thoroughly Clean all of the debris and dirt both from the throat-snap-fit on the bearing surface with specific detergents

3) In the event of difficulties in inserting the gasket in the joint spraying/wetting with liquid soap

4) Mount the gasket starting from the corners in the sequence: (as in photo 1)

- First mount the 4 corners A-A1, B-B1

- Then the center between the points C-C1

- Now push the rest of the gasket starting from the center to the points C-C1 and D-D1

*CAUTION: if the seal has a hole, air vent, the side with the hole must be mounted in the bottom (as in photo 2)

*IMPORTANT: CHECK DOOR SEAL

- If the gasket is mounted correctly, steam should not result in a loss of steam

- In the "combi steam" to 300C, the door must be closed properly. Otherwise an adjustment is needed of the door.

Care and repeated cleaning during the day, greatly extend the life of the seals.